PRC Polaris Ranger Club LLC

FISH · Posted: Tue Jul 17, 2007 3:36 pm Post subject: ANYONE WANT BOOST W/ THEIR RZR!!!

WE HAVE BEEN WORKING ON THIS FOR AWHILE & FINALLY GOT THE FIRST ONE DONE, WE ARE USING THE AEROCHARGER TURBO W/ THE LRD EXHAUST(MODIFIED) WE STARTED OUT W/ 7 LBS OF BOOST & ARE NOW @ 15 LBS.... WE WILL OFFER 2 VERSIONS OF THIS TURBO...1: PUMP GAS, 2: RACE GAS. THIS THING IS SO RESPONSIVE ITS NOT EVEN FUNNY. THIS IS THE FUNNEST THING WE HAVE BEEN IN. WE ALSO DO TURBO KITS FOR THE RANGER & THIS IS JUST CRAZY FUN!!1 WE ARE STILL WORKING ON A PRICE FOR THIS & WILL HAVE IT SHORTLY.

_________________

Koko · Posted: Tue Jul 17, 2007 3:47 pm Post subject:

That thing has gotta move.
_________________
www.ATVTORTURE.com

carnivore · Posted: Tue Jul 17, 2007 3:57 pm Post subject:

If you are going to sell here you must be a sponsor here.
_________________
Curt

09 800 XP from Lakeside Motorsports, Dirty Dawg Performance 800 kit with ported head, Dirty Dawg cam,DDP Bored throttle body,DDP ECU, Boonedocker fuel contoller, DDP snorkel,(DDP Stage III coming soon) , DDP Team Roller Secondary Clutch with Red primary spring, Dayco Wide belt, and Supertips clutch weights,Racer Tech 3" over mid travel suspension, Roll cage and front Bumper , Viper winch,27" Bighorns on ITP T7 12" Beadlocks, 28"Silverbacks on Polaris rims, Graphics by HP Graphx.

www.sxsnation.com

alelks · Guest

I just sent them the following email:

You might as well give me all the info you can so I can save you some phone time. I saw your post on PRCforum.com.

You know everyone is going to have tons of questions.

First off where is the filter and what type filter is it?
Now the 2nd question Where are the intakes located?

Last but not least what numbers you have for this thing like:

a. top speed
b. HP
c. Torque

Do you have any Dyno runs?

Thanks!

FISH · Posted: Tue Jul 17, 2007 4:47 pm Post subject:

SORRY ABOUT THAT I DIDNT KNOW THAT WE HAD TO BE A SPONSOR TO SALE STUFF.....WHAT DO WE HAVE TO DO TO BE A SPONSOR. WE ARE WORKING ON SOME COOL STUFF & I THINK IT WOULD BE GOOD FOR OUR DEALERSHIP... ALSO TO ANSWER A COUPLE QUESTIONS.. DYNO TESTED NOT YET, HOPEFULLY NEXT WEEK, WE ARE TRYING TO FIGURE OUT RAISING THE REV LIMITER. BUT THIS THING IS SCARY FAST FROM 0-62MPH!!! THE INTAKE IS UNDER THE DRIVERS SEAT. WE ARE USING A K&N AIR FILTER. WE ARE WORKING ON A DIFFERENT COLD AIR INTAKE...MORE PICTURES TOO COME!!!
_________________

desertrzr · Posted: Tue Jul 17, 2007 5:19 pm Post subject:

The first guy to come out with a relocated air intake is going to make some quick cash! I'm picturing a Parker Pumper style inbetween the seats up high and out of the dust.
_________________

alelks · Guest

I agree and if he doesn't put it up HIGH he's going to be missing the boat!

Now the guy that comes up with an air intake as well as a different filter location/box is going to make some money!

I'd buy one of those today!

trevorsride · 1000+ Member Joined: 05 Apr 2007 Posts: 1071

quote:
Originally posted by alelks

I agree and if he doesn't put it up HIGH he's going to be missing the boat!

Now the guy that comes up with an air intake as well as a different filter location/box is going to make some money!

I'd buy one of those today!

I totally agree. I would also buy one. The airbox is a complete joke, and it sounds like the intake spot collects way to much dust.
_________________

Grant
Coos Bay Oregon

08 RZR on 14"x27" XTR's on ITP type 7 wheels.
2" Rubberdown lift
Extreme Snorkels

FISH · Posted: Tue Jul 17, 2007 6:19 pm Post subject:

I WILL GET A PICTURE OF OUR INTAKE FOR THE TURBO. THE OTHER COLD AIR KIT WE ARE WORKING ON IS GOING TO BE TRICK!!!
_________________

FISH · Posted: Tue Jul 17, 2007 7:20 pm Post subject:

HERE ARE A COUPLE OF PICTURES OF THE FIRST INTAKE KIT FOR THE TURBO...LIKE I SAID THOUGH THE NEXT INTAKE KIT WILL BE KICK A...

_________________

ravencr · Posted: Tue Jul 17, 2007 7:22 pm Post subject:

What kind of fuel controller are you using with it?

Chris
_________________
UTV Rally - www.utvrally.com

Red Rocker · Posted: Tue Jul 17, 2007 7:24 pm Post subject:

Sweeeet stuff! Work it out with the higher ups so you can be a sponsor and you'll sell some product here, that's for sure. I'm plenty interested already!

Tim

ElecTech · Posted: Tue Jul 17, 2007 10:29 pm Post subject:

quote:
Originally posted by FISH

SORRY ABOUT THAT I DIDNT KNOW THAT WE HAD TO BE A SPONSOR TO SALE STUFF.....WHAT DO WE HAVE TO DO TO BE A SPONSOR. WE ARE WORKING ON SOME COOL STUFF & I THINK IT WOULD BE GOOD FOR OUR DEALERSHIP... ALSO TO ANSWER A COUPLE QUESTIONS.. DYNO TESTED NOT YET, HOPEFULLY NEXT WEEK, WE ARE TRYING TO FIGURE OUT RAISING THE REV LIMITER. BUT THIS THING IS SCARY FAST FROM 0-62MPH!!! THE INTAKE IS UNDER THE DRIVERS SEAT. WE ARE USING A K&N AIR FILTER. WE ARE WORKING ON A DIFFERENT COLD AIR INTAKE...MORE PICTURES TOO COME!!!

You can send Gary an e-mail at absea@tucker-usa.com for sponsor info. I have removed the contact info from your post until then.
_________________
Bruce
Member #2
'05 4X4 Ranger
Rangerware accessories

1 Peter 5:7 Casting all your care on HIM for HE careth for you.

gus · Posted: Wed Jul 18, 2007 2:23 pm Post subject:

let me know what price is. im very interested!!!!! i have a turbo m-1000 and it a blast! gus.
_________________

offroadkarter · Posted: Thu Jul 19, 2007 7:00 am Post subject:

that is awesome, looks factory installed.

Think you can get it on a dyno when its all done?
_________________
03 Ranger 4x4 windshield, rear view mirror,brush guard, extra polaris lights, roof

Welcome to the PRC Ranger Club forum. A family friendly UTV forum for the Polaris side by side enthusiast. Ranger, RZR, HD, 170, RZR-S, Can-Am off-road Information.