PRC Polaris Ranger Club banner

Search results

1-18 of 18 Results
  1. '14 800 midsize wont stay running

    Mid-Size Rangers
    '14 800 midsize. Problem is it wont stay running I haven't went to look at it yet but she says it will turn over and start but unless she gives it some gas it will not stay running. Where to start looking for problem? This machine is all stock and has never had any problems till now, only has...
  2. Front diff shaft replacement?

    Ranger XP 900 & 570 FS Discussions
    Is it possible to replace the splined shaft that comes out of the front diff? I have a 2016 900 xp that I have replaced the front yoke on the prop shaft and it is now wobbling enough again that I can hear it when I’m driving. I don’t really want to have to buy a whole new diff at $1300+ dollars...
  3. Propshaft u joints

    Ranger XP 900 & 570 FS Discussions
    what are you guys using for u joints on the propshaft? I got a '16 Ranger 900xp completely stock machine, even still has the stock 25 inch tires on it. I got 2200 miles on it and I have already put three sets on it and about to put another set in. I have tried the sealed popo ones and the...
  4. Prop shaft removal 2016 900 xp

    Ranger XP 900 & 570 FS Discussions
    I am not the one taking it apart I do not have a clutch puller. So i hauled it back to dealership. yeah I thought it was kind of strange also that the joints are bad already. Not sure how many miles anyone else is getting out of them?? I have a little over 1000 miles on my buggy. I do not know...
  5. Prop shaft removal 2016 900 xp

    Ranger XP 900 & 570 FS Discussions
    Just an update on this subject I called my dealer out of curiosity and he told me that they have been taking the clutch cover and clutch off and that gives them enough room to slide the prop shaft out that way. I hope this info will help anybody else out I believe that is easier that taking the...
  6. Prop shaft removal 2016 900 xp

    Ranger XP 900 & 570 FS Discussions
    Thanks for the info. I guess i will be tearing the front end of the buggy apart tomorrow.
  7. Prop shaft removal 2016 900 xp

    Ranger XP 900 & 570 FS Discussions
    Yes i have the rear of the shaft off i had to loosen up the front diff to give me enough room to slide the back end off. I thought once that was off I could slide it back beside the tranny and that would give enough room to drop the front end down out but no go on that.
  8. Prop shaft removal 2016 900 xp

    Ranger XP 900 & 570 FS Discussions
    I am wondering if anybody has and could explain how they went about removing the prop shaft on their 900 XP. I have twisted, wiggled and slid that shaft every which way and cannot figure out how to get it out through the bottom of the machine. It looked to me like it would have enough room but...
  9. Spare wheel and tire

    Ranger XP 900 & 570 FS Discussions
    thestir, I am in central PA. I cannot believe it would be cost effective to ship a tire across the country. thank you though.
  10. Spare wheel and tire

    Ranger XP 900 & 570 FS Discussions
    Looking for a cheap spare wheel and tire for a '16 900 xp. Where do I look online?
  11. Having trouble keeping latches hooked on canvas doors

    Ranger XP 900 & 570 FS Discussions
    Will likely taking them back to dealer to see if they will do anything about them. If they won't I will probably build handles myself a setup like the ones that were on the seizmik doors I had on my 570. They never came open on me. I would look at those if you are going to be buying them for the...
  12. Having trouble keeping latches hooked on canvas doors

    Ranger XP 900 & 570 FS Discussions
    I sold the 14 570 I had and just bought a 2016 900 xp. I bought Canvas Polaris doors for on it. I am having trouble with the latches on the doors not wanting to latch closed. I am wondering if anyone else is having this issue and if you found a solution for it?
  13. Noise coming from belt housing

    Mid-Size Rangers
    Just to let all know the noise wasn't actually coming from the belt it was the u joints on the driveshaft that goes to the front differential. Thanks for the replys.
  14. Noise coming from belt housing

    Mid-Size Rangers
    Noticed there is a noise that I believe is coming from in the belt housing cover. Not sure whether any one has had problems with the pulley for the drive belt not coming back together fast enough when you let off the throttle. The noise shows up only in high range when I let off the throttle. I...
  15. Ranger 570 making oil?

    Mid-Size Rangers
    I have a 2014 ranger 570 with 75 hours and 615 miles on it that seems to be making oil. By making oil I mean the level seems to be going up but I am not adding any oil to it. I have changed the oil in it one time and put the two quarts of Polaris oil in it at the recommended break in period and...
  16. bolt pattern on wheels?

    Mid-Size Rangers
    Thanks for the info.
  17. bolt pattern on wheels?

    Mid-Size Rangers
    are all the midsize ranger wheel bolt patterns the same? I am looking at buying a spare wheel and tire for my 2014 570 ranger but my dealer wants around 250 bucks for one stock front wheel and tire. I am not going to spend that much for one wheel and tire if I can buy a whole set of four on ebay...
  18. What wheels will fit 570?

    Mid-Size Rangers
    I am looking at getting a spare tire I can take with me on rides and I was thinking maybe I could buy some take offs rather than a new one from the dealer since they want 250 dollars for one wheel and tire. Was wondering what all models have the same bolt pattern and will work on my 570? also...
1-18 of 18 Results
Top