PRC Polaris Ranger Club banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Ranger Problems & Solutions
    I recently bought a 2012 Ranger 800 xp. I knew it needed work, but it needed a lot more than I thought. It didn’t have any brakes when I first got it. It needed a couple new calipers so I went ahead and replaced all four. It didn’t fix my problem so I replaced the master cylinder. After bleeding...
  2. Ranger Technical
    Hey everyone just joined and have a few questions hoping for a little help. I just bought a 2021 ranger 570 crew midsize premium. I have been properly breaking in my SBS but have noticed a few things. My brakes seem to be dragging. I first thought maybe I had some sand in my bearings but after...
  3. Ranger Technical
    I have a 2013 Ranger Crew 800 that I took on a drive up a canyon recently. On the way down there was a period during which the brake pedal would depress all the way to the ground and even then provide very little stopping power. With my whole family in the vehicle, it was quite scary, but we...
  4. Ranger Technical
    Hey everyone, I have my 1999 ranger 6x6 up on jacks to bleed the brakes. There is about 1/8" of pad left, should I replace the pads or is there a lot of life left. I would very seldom if ever be on the road plus i am on a very strict budget. I am ready to start the bleeding process after a...
  5. Ranger Technical
    Hello everyone, I am not certain where this post belongs if this is not it please forgive me and point me in the right direction. I have a 1999 ranger 6x6 that has been sitting in a shed for 3 years. I have it running and moving good just need to change fluids and grease job. it will run good...
1-5 of 5 Results
Top