PRC Polaris Ranger Club banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Ranger Technical
    I have recently bought a 2006 700XP EFI ranger with ~740 hrs and the guy I bought it from had an aftermarket idle voltage adjustment screw in the throttlebody. It is too long (2”) and if someone rides in the middle of the seat it rubs and causes the screw to come out of adjustment. Does anyone...
  2. General Member Discussions
    I bought a 2006 Ranger XP700 from a friend a few months ago. It ran OK, a little rough, but it functioned just fine. When I got it, I did everything I thought you should do: replace the filters, fluids and spark plugs. While I was doing that, I noticed a crack in both of the rubber air intake...
  3. Ranger Problems & Solutions
    I have some issues on my 2008 Ranger Crew. Someone changed the throttle cable and used the wrong one, so I was going to replace it with the correct one. I don't know the factory routing since I was not the one that removed the original one. I have heard this is critical and may be the reason I...
1-3 of 3 Results