PRC Polaris Ranger Club banner
1 - 15 of 15 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
ive lurked around here on forum for a few years , and never really posted , I have a 2013 ranger 500 efi, looking to buy a 2" lift kit . My question is , can I buy one that I will not have to buy longer axles. Also any recommendation for a rear seat for the back , so my kids can ride with me and the wife​
 

· Registered
Joined
·
1,961 Posts
Some say Yes, some say no..Seems to be a varying answer from machine to machine. Id suggest EV springs, or make spring spacers. However, alot of ppl prefer SATV lifts, Highlifter, and Marshal MotoArt kits.
 

· Registered
Joined
·
2,038 Posts
I personal advice satv
 

· Registered
Joined
·
429 Posts
I have a Super ATV 3" lift. Very well made. I didn't need longer axles, but It's not a 500.
 

· Registered
Joined
·
204 Posts
Well that don't really help with his question does it?!
 
  • Like
Reactions: JJaxon

· Registered
Joined
·
63 Posts
I have the Mashall Motoart 2.5" lift on my full size machine and I didn't have to have longer axles.
 

· Registered
Joined
·
429 Posts

· Registered
Joined
·
2,038 Posts
Guys this is the midsize section, your suspension has nothing to do with ours
 

· Registered
Joined
·
1,778 Posts
If it's going to come out, it seems to always be the front passenger side. I had a buddy that ran a 2" lift on his 450 for several years with no problem then he let the suspension droop one day and out it came. I had to weld up his diff because the axle ate a hole in it before he realized what it was. Just one of those "can't make it happen twice" things.
 

· Registered
Joined
·
2,038 Posts
Just 2" lift and forward a arms you can run up to 31s. And no a arms don't add lift
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top