PRC Polaris Ranger Club banner

2012 Ranger 800 HID installation

566 Views 1 Reply 2 Participants Last post by  StannieXP800
Ok folks...I am an idiot here. I ordered a Xentec H13/9008
biXenon HID kit. It comes with the plug/play as I can figure that out. What has me stumped is the "relay controller" for the hi/lo system. Do I unplug the factory headlights and use one of the sockets on the relay controller, then just cap off the other factory bulb plug in? That seems to be my main issue. I can figure out all other wiring but that!! Any help guys would be great!!
1 - 2 of 2 Posts
Yes use one of the stock female headlight plugs and cap the other one .
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.