[Gadestroyer74]

Anyone know if this tool box will fit the bed of the ranger correctly ? I'm looking for something like this in black slim line and low profile. I'm not opposed to plastic ones either.

Better Built Black Low Pro Midsize Slimline Wedge Box - Walmart.com

 

[Trippin]

My toolbox measure right at 60" long, it hangs over edge of bed 1/2" on each side. The one you have linked measures 64 1/2" long, it would hang over 2 3/4" on each side of bed. I would not purchase that one, just to much hanging over.

 

[Mrmojorisan]

I got mine from Lowes... I want to say they around $150 I think?? cant remember... it hangs over each side about 1"
sorry but this is the only pic I have. It needs a new coat of paint on it

 

[Gadestroyer74]

Ok thank you ! I seen one at lowes for 159 buts it's not black. I agree I wouldn't want that much over hang I can live with 1/2 inch. Does anyone have any leads on some ? I would Rather stay under 200. That's a nice crew I have those wheels on mine with big horn tires

 

[Trippin]

Bought mine off ebay, $200 if I remember right. Mine is not low profile tho. Just an idea!

 

[Gadestroyer74]

That looks sweet ! I'm on the road and don't have access to my machine to measure anything..

 

[SFARANGERXP]

Do y'all have the model numbers of the tool boxes? I'm looking for one for mine also.

 

[Trippin]

Yup here is my model number.

 

[Gadestroyer74]

The best deal I have found has been at lowes on a 60 inch it's 159 but it's aluminum not black

 

[Gadestroyer74]

Yup here is my model number. View attachment 10167

Cheapest I found on yours was 200.97 free shipping no tax

 

[Trippin]

Yeah I paid $200 shipped to my house. Little much but he'll whats another couple Benjamin's lol

 

[Gadestroyer74]

I know I right ! I just dropped 3300 in the last two weeks on my 2015 900xp ranger yikes !!

 

[Trippin]

I know I right ! I just dropped 3300 in the last two weeks on my 2015 900xp ranger yikes !!

Ya have any pics? Would like to see what ya have!

 

[Gadestroyer74]

See if this works. 2015 ranger 900xp. Mods are 52 inch led light bar polaris poly roof lock n ride poly windshield. Bad dawg front and rear bumpers with bull bar. KFI stealth 4500lb winch with synthetic rope. Msa 14 inch wheels max is big horns 26 inch dragon fire doors. . Have 3 switches led light bar switch winch switch and rear cargo light swtich. Have two led work lights for the rear on the way.

 

[Trippin]

See if this works. 2015 ranger 900xp. Mods are 52 inch led light bar polaris poly roof lock n ride poly windshield. Bad dawg front and rear bumpers with bull bar. KFI stealth 4500lb winch with synthetic rope. Msa 14 inch wheels max is big horns 26 inch dragon fire doors. . Have 3 switches led light bar switch winch switch and rear cargo light swtich. Have two led work lights for the rear on the way.

SHARP! I like that light bar, how you mount it? Where did you run your light bar wires? Same wheels and tires I want! Very nice ride man!

 

[Gadestroyer74]

Thank you ! I used the mounts that came with it. I flipped on of them over as it was to wide the foot print I'm OCD and it's driving me nuts. Had to make shims to even out bracket lean. It is seriously bright can't even tell the headlights are even on. I ran wires through poly roof down edge of windshield and roll bar and into dash at bottom. .. This is my first ranger and side by side of any kind. Yours is sharp I'm not much into music and all that but you got it hooked up

 

[Trippin]

Lol yeah I like to be the "life of the party" haha. Very nice ride man!

 

[Gadestroyer74]

Thanks bud ! Nothing wrong with that. Question why do you use a blue sea fuse box ? I mainly just work and hunt with mine I'm not much into going out on trail rides with a lot of folks. I tend to get stupid and that hurts and cost money lol

 

[Trippin]

I used mine to keep wires looking clean, and it is so much easier to run everything to it that way everything is fused so no shorts. Hell even my rocker switches are ran to fuse block added safety.

 

[Gadestroyer74]

I'm gonna have to look at that