PRC Polaris Ranger Club banner

29.5x12x14's all the way around

1708 Views 4 Replies 4 Participants Last post by  onequik89
Any one with a ranger 800 or ranger crew 800 running 12 wides on the front? im wondering if they will clear without spacers. found a potential good deal on 29.5x12x14 terminators just wondering if they'll clear. i do have a 3" backwoods lift so height clearance is not an issue. just curious about the width. thanks
1 - 5 of 5 Posts
Any one with a ranger 800 or ranger crew 800 running 12 wides on the front? im wondering if they will clear without spacers. found a potential good deal on 29.5x12x14 terminators just wondering if they'll clear. i do have a 3" backwoods lift so height clearance is not an issue. just curious about the width. thanks
I think you're going to rub unless you have forward A-arms.

Running 12" wide tires on the front will depend on wheel offset, but there's a good chance that spacers will be needed.
Hell I wouldn't suggest it cause of the carnage it will create. The 29.5x12x14 terms are rediculous heavy and will destroy the front end of that poor ranger
I think you're going to rub unless you have forward A-arms.

Running 12" wide tires on the front will depend on wheel offset, but there's a good chance that spacers will be needed.

i have the 3" outkast lift with forward a arms. my bad. i have 30x10 wide mud lite xxls ont here now and they dont rub anything.
I've got the 29.5x10x14 terms all the way around my crew with the 3" outkast kit with no issues. It is kind of tight when turned all the way but no rubbing on my crew.

Attachments

See less See more
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top