[David Williams]

I have a 07 700 EP and right now it has a 3" lift with 30" mud lights under it and i'm thinking about bying the new 31x12x12 outlaws. i no the back will be fine but if i go with 12" wide in the front they mite rub i don't no. has any one ran these big tires yet? i just called highlifters and they want even have them in until july. i'm going to call yasky atv now and see what they say.

 

[jlp]

I had 29.5's on mine with the 2" lift and it rubbed when I hit something hard and compressed the suspension all the way in the front. But only then did it rub the back inner fender wells. What you could do is have someone build you some a-arms to move the tires forward 1" to 1.5" to keep it from hitting. The 12's in the front are probably going to rub without spacers. Another thought if your wanting mudtires is the new 30" mudzilla which are being shipped out now. I have a set ordered for my atv. One more thing the new outlaws and mudzillas are going to be 14" not 12".

 

[curt]

I'm going to owen a set when they come out. I'm going to run 31x12x14 all the way around. But I also will have enough lift to clear these. But most inporant I also have the POWER to turn'em........Curt

 

[denny]

i have the new 30inch mudlites,14 inch rims 3inch lift, mine dont rub at all one inch spacers front and rear......

 

[Dwayne]

I have 30" on mine with it lifted about six inches. Once in a great while they would rub the back side in a very hard bind. My daughter may have bent the lower control arm just a little and now it rubs on one side a little more.