I use yamabond for sealing the case halves. All other gaskets are Polaris. If the sprocket won't go on you may need to heat it up.
800 engine reassembly question
ran my 800 out of oil and am in the process of rebuilding. I am wondering what gasket maker does everyone reccomend to use when putting the cases back together? Also doe everyone heat up the crank sprocket like the manual says? Does this make getting the sprocket on easier or something thanks.
1 - 5 of 5 Posts
Is there a certain yamabond to use? From what I've read number 4 is what I need
That is what I use and you will have to prime the oil pump with oil and a tube. Look in service manual.Is there a certain yamabond to use? From what I've read number 4 is what I need
I use Permatex grey or black RTV. I've rebuilt several engines and trannys, and (knock on wood) never had one leak.
1 - 5 of 5 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
PRC Polaris Ranger Club
PRCforum is the best Polaris forum community to discuss RZR 1000, Crew 900, PRC Ranger Club, XP 900, RZR XP 4 900, RZR 570, HD, 170, RZR-S, XP 900, RZR XP 4 900, ORV, side by side, SSW and off-road information.
Full Forum Listing
Recommended Communities
