[cowpen]

I bought a set used from a member here, so I don't have instructions. The lower arms can only go one way. I've tried the uppers every which way. They're off by about a 1/2". In this photo, the zerks on the uppers are facing down. If I flip the upper arms, they're even farther off. Nothing looks bent. Any ideas?

 

[Grundo]

How old are the arms? I know a while back john had some issues with some of his employees and fabrication. Maybe u got a bad set. Something is definitely wrong. Did they come off of a 2015 900?

 

[Grundo]

I would also call John at BA and see what he says. I know one member had issues with arms he bought used and John took care of him. Worth a shot.

 

[cowpen]

Not sure of the year, but the seller said it came off a 900. As far as I know, the suspension hasn't changed on the 900's since they were released.

I'm really glad I didn't pay to have these powder coated to match my fronts before I tested the fit.

I'll give BA a call on Monday... hopefully they can help me out. Thanks for that suggestion.

 

[907DIRT]

Think you might have them on backwards.. cant tell but it looks like the sway bar should be on the otherside... looks like the wrong bottom arm..

 

[Bamarider]

Is that on the driver rear side?

 

[Bamarider]

Mine looked the same way on the drivers side and I just pryed it into place. The passenger side was perfect.

 

[cowpen]

Is that on the driver rear side?

Yes - rear driver side.

Mine looked the same way on the drivers side and I just pryed it into place. The passenger side was perfect.

I considered that, but it seemed like a bit too much to stretch. I figured the bushings might last about a week.

Didn't get a chance to call John at BA today. Maybe tomorrow...

 

[SNWMBL]

I wouldn't pry on anything to make it fit, you'll kill your bushings in no time.

 

[fswan]

Something isn't right - I'd talk to John before you try and force anything!!!!

 

[ronehughes]

Bamarider, do you have stock axels with your set up.

Mine looked the same way on the drivers side and I just pryed it into place. The passenger side was perfect.

Do you have stock axels.

 

[Bamarider]

Yea stock axles still. Have had lift on for a few months now and no issues

 

[kscfire]

Well have you had any luck with your issue? Was John able to answer your questions?

 

[kscfire]

Any updates if you got them to fit right.