[vidman]

OK guys...need to know what offset wheels to get. i will be getting 4 30/10/14 roctanes. i think the stock fronts are 4-2 and the rears are 5-3.. what i would like to know is what backspacing to get on my new wheels so i dont need spacers. i have 800 midsize with 2' lift, with ev springs and SATV front arched a-arms and soon rear arched a-arms...want to do this right... almost ordered 32s but was not sure if they would fit..Thanks for all your help...Rick

 

[SiPPMSH]

Rick, I'm pretty sure that OEM wheels on your rig are 12" tall with an offset of 4+2 for the front and 6+2 for the rear. In order to appropriately clear the 10" wide tires up front you'll need a wheel with less backspacing. I would recommend either a 3+5 or a 3+4 for the front and either a 5+3 or a 4+3 for the rear.

You could potentially go with a rear offset of 4+4 if you'd like.

 

[Discount Tire]

One of the guys in our office is running 14x7 4+3 wheels with 28x10R-14 tires all the way around on his Ranger Crew. He has forward a-arms to make it fit.

Here is a photo with the same wheels but 27.5x9R-14 and 27.5x11R-14 Pit bull Growler Uber tires on it.

 

[littlebigrancher]

If you are ordering from a company just tell them.whst bike they are going on and they will know the correct back spacing

 

[vidman]

Just trying to find wheels with the right off-set so i dont have to use wheel spacers

 

[littlebigrancher]

Like I said the company's already kn ow what you need to run. All any of me or friends with midsize have ever done is just tell them.its for a polaris midsize and they give us correct offset