PRC Polaris Ranger Club banner

1 - 7 of 7 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter #1
Anyone know where I can watch a video of an oil change for my 800 crew? I know this sounds silly, but I want to make sure I get it right along with any tips.
 

·
Registered
Joined
·
2,192 Posts
Before you remove drain plugs, remove the fill plugs. I learned the hard way. Good luck bro, it's a piece of cake!:glee::encouragement:
 
  • Like
Reactions: Bubbabuzz

·
Registered
Joined
·
67 Posts
Discussion Starter #5
Anyone know what drive/bit fits the drain plugs on the 2013 Ranger? I thought I had one, but nothing in my tool box fits.
 

·
Registered
Joined
·
22,346 Posts
Most Poalris drain plugs require a 6mm and 8mm allen wrench.
 
  • Like
Reactions: Bubbabuzz

·
Registered
Joined
·
67 Posts
Discussion Starter #7
Got the old oil drained, and refilled, along with a new filter. That filter was a bear to get to!! Luckily I was able to unscrew the old one with my hands (death grip from my fingers). :playful:

I used a 6mm (thanks commanderjjones) allen wrench to remove and replace the drain plug, after thoroughly wiping it and the copper washer down. I'm not sure how to check the torque setting on these, but I snugged it up by hand pretty good.
 
1 - 7 of 7 Posts
Top