I have a 2013 Ranger XP 900 LE. Went to start it today and it cranked, but would not start. Battery is new. 12.7v before load test. 10.5v during load test. Next, I want to test fuel pressure. I have watched many videos. Some check pressure at fuel tank. Some test on fuel rail. Some test by just cycling the key. Some suggest you have to start the engine (problem for me right now). Can anyone recommend a fuel pressure test kit (make, model #, where to buy) that includes the fittings to fit my Ranger? If I need any special fittings, same questions (make, model, where to buy?) Thanks.
Natethedog
Joined
·
9,784 Posts
Nate, I have had this kit since it was $39;00 
and I haven't found a Ranger that had a (key on) fuel pump that I couldn't adapt it to with what is included. Install that tee anywhere in the fuel line after the pump and last filter and you are good to go for the duration. https://www.amazon.com/Actron-CP783...sr_1_2?keywords=actron+fuel+pressure&qid=1572203449&s=automotive&sr=1-2-catcorr
and I haven't found a Ranger that had a (key on) fuel pump that I couldn't adapt it to with what is included. Install that tee anywhere in the fuel line after the pump and last filter and you are good to go for the duration. https://www.amazon.com/Actron-CP783...sr_1_2?keywords=actron+fuel+pressure&qid=1572203449&s=automotive&sr=1-2-catcorr
Joined
·
9,784 Posts
mat, if you havent purchased a fuel pressure tester yet, there have been major improvements in adaptability with the newer style kits. Amazon.com: BETOOLL Fuel Pressure Test Kit 0-100PSI with 9.49,7.89,6.30 Fuel Line Fittings : Automotive
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
