PRC Polaris Ranger Club banner
1 - 2 of 2 Posts

· Registered
473 Posts
Discussion Starter · #1 ·
Trying to maximize the flex on my LTB's. Cut the wear bars out and used a 1/2" blade to widen/deepen the voids, then cut the lugs in half with the 1/4" blade. Made a big difference in flex and traction on my Samurai, should do the same for the ranger.

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.