[jimmyp]

I am needing to add a 2" receiver to my 400. The receiver will not need to take much abuse, it will actually only be used to put a rack in to hook 2-3 pointers to and "road" them. the rack will be attached not only to the 2" receiver but will also be hooked to the roll cage at 2 points, resulting in most of the pulling being off of the cage.

I think I know how i will plan to attach the receiver, but i would like to hear some input, and see some pics of how you guys have done this.


Jim

 

[Mtjag]

I am needing to add a 2" receiver to my 400. The receiver will not need to take much abuse, it will actually only be used to put a rack in to hook 2-3 pointers to and "road" them. the rack will be attached not only to the 2" receiver but will also be hooked to the roll cage at 2 points, resulting in most of the pulling being off of the cage.

I think I know how i will plan to attach the receiver, but i would like to hear some input, and see some pics of how you guys have done this.


Jim

Connect with Platinum Powersports as they have a bracket with a 2" receiver built in that will fit your model. I think this is the part number OEM #: 105255

KFI Plow Mount from Platinum Powersports

 

[revrnd]

This is the kit I installed on my 2011:

Mid-Size Ranger Front 2" Receiver Hitch