[atvoutfitters.net]

Most all of these items are not yet out, but I have pricing and part #'s on them for the RZR.

Big Gun Full Exhaust and TFI controller
DG Bullet Full Exhaust
DG Bullet Slip on Exhaust
DG X2 Full Exhaust
DG X2 Slip on Exhaust
Front and Rear Aluminum A-arm guards
Front Aluminum Racing Bumpers (multiple styles)
Full chassis skids in both Aluminum and Stainless versions
Nerf Bars in Aluminum, Black Aluminum, and Black Steel.
There is also a Universal Radio that has a submersible control panel and water resistant brain box (possibly this could mount under the dash and a bracket can be fabricated for the panel).
Most items look like they are a couple of months away, but that's not too bad.

 

[Ran]

Thanks Matt.

 

[fiberguy]

Matt,
I can't wait to see what your RZR looks like when done, I'll bet you end up with more in it than I have in my F-250[:0][][]

 

[atvoutfitters.net]

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by fiberguy

Matt,
I can't wait to see what your RZR looks like when done, I'll bet you end up with more in it than I have in my F-250[:0][][]
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

It's possible, but I was remarkably restrained on my Rhino, with only about $12000 total in it total including the $8599 out the door I paid for my early Camo (the price has gone up a few times from Yamaha since then). I think I will have more in this unit, but we will see.

 

[Red-RZR]

Sounds good Matt. Keep on fabricating. Maybe some half doors?

 

[NATHAN]

HALF DOORS WOULD BE NICE!

 

[atvoutfitters.net]

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by NATHAN

HALF DOORS WOULD BE NICE!
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

There are already 2 vendors working on them I am told with a third waiting to get a RZR for the "R&D".

 

[cisco kid]

Thanks for the update ;-)

 

[Maskos]

Matt,
Do you have a date for the radio and skid plates yet?

 

[EPE_79]

I've been holding out for some bumpers i'm excited to see the different styles! must see pics!!!

 

[Adam12]

Would like more info on alum guards, if there out yet and price plz shot me an e-mail Thanks


<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by atvoutfitters.net



Most all of these items are not yet out, but I have pricing and part #'s on them for the RZR.

Big Gun Full Exhaust and TFI controller
DG Bullet Full Exhaust
DG Bullet Slip on Exhaust
DG X2 Full Exhaust
DG X2 Slip on Exhaust
Front and Rear Aluminum A-arm guards
Front Aluminum Racing Bumpers (multiple styles)
Full chassis skids in both Aluminum and Stainless versions
Nerf Bars in Aluminum, Black Aluminum, and Black Steel.
There is also a Universal Radio that has a submersible control panel and water resistant brain box (possibly this could mount under the dash and a bracket can be fabricated for the panel).
Most items look like they are a couple of months away, but that's not too bad.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

 

[oneal]

Cool

 

[Chiefmorton]

Sounds good Matt. The more goodies the merrier!

Brian