PRC Polaris Ranger Club banner

1 - 9 of 9 Posts

·
Vendor
Joined
·
322 Posts
Thanks Jerry, i'm glad you like them. They are shipping to distributors now so everyone else can start to enjoy as well.
Jody
 

·
Registered
Joined
·
22,346 Posts
Discussion Starter #3
After finally getting to ride with them, they are as good as I expected. No vibration, good field of view, and minimal blockage to you line of sight. I'm really liking these......MUCH better than my previous mirrors.:cool:
 

·
Registered
Joined
·
621 Posts
Nice write up, good to know the mirrors function as good as they look !!!
 

·
Registered
Joined
·
36 Posts
Great write up Jerry, thanks for the info. Ive been holding off to find just the thing for the XP cage and these look great. Plus you can't beat the warranty.
 

·
Registered
Joined
·
8 Posts
Thanks Jerry! Do you know or does anyone else know if these would work on a 2012 XP800 with Factory cab/doors, etc.? Below are the part numbers for what I have. Thx!!!!
1. Pro Steel – part # 2878214 – Pro Tip Out Windshield
2. Pro Steel – part # 2878215 - Pro Steel Roof
3. Pro Steel – part #2878216 - Pro Steel Doors
4. Pro Steel – part # 2878217 – Pro Steel real panel
 

·
Registered
Joined
·
22,346 Posts
Discussion Starter #7
Not having a cab (typically no need for those this far south), I can't say beyond the shadow of a doubt.....but feel fairly confident they will work with the steel doors if you through-bolt them (not the conventional attachment method). I don't think it would be an easy attachment if you were trying to use them with the soft doors.

I'm gonna send Jody a PM and attach a link to this thread. Maybe he has some feedback from somebody who has done this and can offer a definitive answer.
 

·
Vendor
Joined
·
322 Posts
Thanks Jerry! Do you know or does anyone else know if these would work on a 2012 XP800 with Factory cab/doors, etc.? Below are the part numbers for what I have. Thx!!!!
1. Pro Steel – part # 2878214 – Pro Tip Out Windshield
2. Pro Steel – part # 2878215 - Pro Steel Roof
3. Pro Steel – part #2878216 - Pro Steel Doors
4. Pro Steel – part # 2878217 – Pro Steel real panel
I'm sorry if I missed your question, but Jerry is correct, you would have to bolt through to mount the mirrors to your doors. Again sorry if this is late.
Jody
 

·
Registered
Joined
·
388 Posts
I have A '12 800 HD with the Pro Steel cab and canvas doors. I took a Seizmik outside rearview mirror, the elephant ear ones, and drilled holes in the side of the cab pillar to mount the mirror. As soon as I get above a ten post count I'll post a pic. But there is one issue, It sits pretty close to the cab, so I have to lean towards the side window to be able to view out the mirror. But it will work.
 
1 - 9 of 9 Posts
Top