PRC Polaris Ranger Club banner
1 - 1 of 10 Posts

· Registered
171 Posts
Discussion Starter · #1 ·
Hello everyone. About 6 weeks ago I noticed a small crack in the black plastic under the driver's rear cage upright. I found it but have neglected to do anything to fix it yet. I had been planning on fixing the problem so today I went out to re-evaluate the situation and this is what I found. The first pic is more to give you reference of the location and the next pic shows the actual split as it is today.

It is about a 3/16" longer longer than it was 5 or 6 weeks ago. I plan on drilling it out at the point today and then possible applying some type of glue. Should I use an epoxy or should just drilling it out be ok? I will post pics once I'm done drilling it out.
1 - 1 of 10 Posts