I couldn't find the codes, but we changed the oil at about 25 hours and I stepped into it this past weekend and the wrench light, as stated in the title, blinks 10 times on startup. Anyone know what's wrong?
wcpolarisranger4x4
Yup no worries, but do try a reset it ;-)
50 hr wrench key program
The service interval is programed at 50 hours at the factory
Instructions for resetting the service interval are
1. Turn the key switch off and wait 10 seconds
2. Lock the parking brake
3. Place the transmission in neutral
4. Hold the mode button (yellow button) and turn the key switch to on position. Release the mode button as soon as the display is activated.
5. Use thew mode button to toggle through the diagnostic modes
6. Stop at the wrench icon
7. Press and hold the mode button for 3 seconds, and the wrench icon will begin to flash, release the button.
8. Press and release the mode button once to advance the setting by one hour. Press and hold the mode button to advance the hours quickly
NOTE If you scroll past the intended number, press and hold the button until the hours cycle back to zero.
9. When the desired setting is displayed, wait until the icon stops flashing. The new service interval is now programed.
50 hr wrench key program
The service interval is programed at 50 hours at the factory
Instructions for resetting the service interval are
1. Turn the key switch off and wait 10 seconds
2. Lock the parking brake
3. Place the transmission in neutral
4. Hold the mode button (yellow button) and turn the key switch to on position. Release the mode button as soon as the display is activated.
5. Use thew mode button to toggle through the diagnostic modes
6. Stop at the wrench icon
7. Press and hold the mode button for 3 seconds, and the wrench icon will begin to flash, release the button.
8. Press and release the mode button once to advance the setting by one hour. Press and hold the mode button to advance the hours quickly
NOTE If you scroll past the intended number, press and hold the button until the hours cycle back to zero.
9. When the desired setting is displayed, wait until the icon stops flashing. The new service interval is now programed.
8. Press and release the mode button once to advance the setting by one hour. Press and hold the mode button to advance the hours quickly
so ,if i set it to 25 hours ...will the wrench light come back on to remind me to service it?
how many hours do u all change the oil ...or what do u all recommend?
so ,if i set it to 25 hours ...will the wrench light come back on to remind me to service it?
how many hours do u all change the oil ...or what do u all recommend?
Gun Mount
Hi Guys,
With the latest shooting of a Duputy (from my home town) by smugglers with AK-47s, here in southern AZ, it's arm up or don't ride.
The Glock side arm that I carry (with CC permit) may not be enough. So I'm getting a short barrel (18"), 8 round, 12 gauge pump shot gun to carry in the RZR and on my quad.
What ideas do any of you have to mount it in the RZR in order to be out of the way, but easy access and protected from rain and dust ?
Chuck
Hi Guys,
With the latest shooting of a Duputy (from my home town) by smugglers with AK-47s, here in southern AZ, it's arm up or don't ride.
The Glock side arm that I carry (with CC permit) may not be enough. So I'm getting a short barrel (18"), 8 round, 12 gauge pump shot gun to carry in the RZR and on my quad.
What ideas do any of you have to mount it in the RZR in order to be out of the way, but easy access and protected from rain and dust ?
Chuck
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
