PRC Polaris Ranger Club banner

1 - 9 of 9 Posts

·
Registered
Joined
·
684 Posts
Discussion Starter #1
I have a 6x12 single axle trailer I haul my Ranger on. The tires are wearing out on the inside because the axle is either bent or never had the correct camber. Anyone have any recommendations where I can buy a good quality replacement axle?

Thanks
 

·
Registered
Joined
·
3,033 Posts
have you tried taking it to an alinement shop ?
 

·
Registered
Joined
·
684 Posts
Discussion Starter #3
I don't know of anyone around here that could align a trailer axle. I think they have to bend them to get the camber set.
 

·
Registered
Joined
·
23 Posts
I had the same problem when I bought a used enclosed trailer and the tire shop said it was because I had a bias tire on it put all new tires on and have not had any problems
 

·
Registered
Joined
·
684 Posts
Discussion Starter #5
Tires aren't the problem on this one. I put on new tires and new Timken wheel bearings. Still has the camber problem and wearing the tires on the inside.
 

·
Premium Member
Joined
·
6,359 Posts
Northern Tool also carries axles.
 

·
Registered
Joined
·
1,874 Posts
Some alignment shops will do this, and yes they have to bend the axle. I have a friend in this business and although I've never had it done to a trailer he said they sometimes have to bend rear axles on some front wheel drive cars.
 

·
Registered
Joined
·
22,346 Posts
Richard,
I responded to your PM.
 
1 - 9 of 9 Posts
Top