[RickieLee]

I tried multiple searches but couldn't find any posts to help me. On my rzr s what equip or tool do you guys use to add fluids to the gearcases and tranny? I don't have a lift available so have to do it from underneath. Fluids are too expensive now to waste half trying to fill. Thanks in advance!

 

[tjm]

Cap for oil can with nipple, attach clear hose to nipple, squeeze...

 

[pede58]

tjm.....all I see is "nipple" and "squeeze".....ositive:

I use old snowplow oil bottles, some 90wt come with the nipple and I think you can even buy them, seen them somewhere maybe AutoZone could have even been at Walmart.

 

[commanderjjones]

Cap for oil can with nipple, attach clear hose to nipple, squeeze...

Same here. If you don't have those items, you can get them at your local auto parts store.

 

[trailcutter]

I use a funnel with a shut off valve and hose attached to bottom,also shows measurements on funnel,works great especially on front dif,

 

[Toxic-21]

I use a funnel with a shut off valve and hose attached to bottom,also shows measurements on funnel,works great especially on front dif,

I use these also, works great so far. Purchased at Walmart.

And they have lids on them to keep the trash out.

 

[MikeT]

I use a funnel that came with an extension. I think the funnel was originally designed to fill an automatic transmission. I measure the correct amount of fluid for each unit and send it down the line.

Mike