[Marvy Joe]

Hey guys. Looking for comments and opinions from the Rangers with front cargo racks. I really like the new Seizmik rack. Problem is that I don't know if it will interfere with my tip out windshield operation. I can cut and weld but I'd rather not on a brand new piece of equipment. Thanks guys

Tw

 

[Marty]

Hi,

Ours clears the tip out and also the doors etc. should you be going that route in the future. Here are some more pictures.
Polaris Ranger Front Rack Full Size Folding

Marty

 

[Marvy Joe]

Thanks Marty. Any more pictures?

 

[Mikep123456]

Here's one on an 800.

Mike

 

[Marty]

Thanks Marty. Any more pictures?

None other than the 8 in the link.

 

[stevensinks]

If I could figure out how to post a photo I would show you one I made.

 

[HRTKD]

None other than the 8 in the link.

Now that's some dry humor right there.

 

[Marvy Joe]

Your link only displays 1 picture on my phone. Don't be too quick to make a potential customer the butt of a joke. Especially when your product is +$100 than the competition.

 

[HRTKD]

Using a browser on a PC I see 8 photos. I have to select each one to see it.

 

[Marty]

Your link only displays 1 picture on my phone. Don't be too quick to make a potential customer the butt of a joke. Especially when your product is +$100 than the competition.

Truly sorry that you took it that way Marvy Joe. What I meant was that the pictures on that page are all that I have and that I thought you may be having some issues seeing them all on your device. Purely factual. I mentioned the number to clarify for you that there were 8 total. If you couldn't see them all then how would you know how many there were?
I assure you that it was not meant to be humor one way or the other. It was the only way I could explain it.
Seriously. I don't do business that way. Please don't think I do.

Peace,

Marty Johnson

 

[Marty]

Regarding the price difference you're absolutely correct. Ours are all made here in the USA and built like a tank. We have Marine units in the Mideast using them for machine gun mounts (big machine guns). I can honestly say that if you compare ours to anyone else's you'll see why. We're pretty obsessed with trying do do the best that we can.
Again, sorry for ANY bad feelings. None of it was not meant to be taken that way.

PS. This is the video that the Marine unit in Camp Leatherneck (outside Baghdad IIRC) saw that got them to buy a few.
Front rack mounted M2

 

[Marty]

Here is another off of our roof. To be truthful, There was another plate mounted below the roof to stop the mounting bolts from pulling thru. (increased footprint)

Try that with a poly roof. =)

 

[fswan]

Dang--sometimes it's hard to be a vendor on this site! Hang in there, Marty, the quality of your products speak for themselves!

 

[markcp]

Here is another off of our roof. To be truthful, There was another plate mounted below the roof to stop the mounting bolts from pulling thru. (increased footprint)

Try that with a poly roof. =)

Now that M2 would be a great option.

 

[VirtualRider]

Now that M2 would be a great option.

yes, it would!

I had a front rack on my old Rhino, had to take it off because it created a big blind spot in front of the vehicle.

 

[Marvy Joe]

Thank you for the responses Marty.
I apologize for my sharp tongue. I don't doubt you build the strongest parts out there. Interpretation is everything on the internet.

Cheers,
TW