Yeah, the spacers are probably causing the problem. If you get anything make sure you get the forward control arms. The stock height forwards from HighLifter allow up to 30" tire on my 800xp.
Will adding a 2" High Lifter lift help?
I put 27x11x14 tires on with 14x7 wheels and 2 inch wheel spacers all the way around on my ranger 900xp. They rub when I turn and am wanting to know if a 2" high lifter lift should make the rubbing go away. I currently have the shocks on the outer mounts and the springs as stiff as they will go.
I am hoping this will work and also be able to back the springs off to a softer setting. Thanks.
I am hoping this will work and also be able to back the springs off to a softer setting. Thanks.
1 - 1 of 11 Posts
1 - 1 of 11 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
PRC Polaris Ranger Club
PRCforum is the best Polaris forum community to discuss RZR 1000, Crew 900, PRC Ranger Club, XP 900, RZR XP 4 900, RZR 570, HD, 170, RZR-S, XP 900, RZR XP 4 900, ORV, side by side, SSW and off-road information.
Full Forum Listing
Recommended Communities
