PRC Polaris Ranger Club banner
1 - 4 of 4 Posts

·
Administrator
Joined
·
6,980 Posts
Here is another post with a "what goes here" question;
Factory Polaris roof liner, has a nice cut out for something... has to be a dome light right? Opening is centered on the roof liner. See the close up, there are mounting locations. But I don't find a dome light accessory from Polaris that looks like it will fit there. I guess I can search the parts for a Northstar and see if they get one stock that may fit... thats an idea.
View attachment 140474 View attachment 140475
It is for the dome light.

Can you give me some wider pics of the underside of your roof and some more unit information.
It appears your dealer has given you some new old stock components.

Also, I have the lights, both new and old style.
 

·
Administrator
Joined
·
6,980 Posts
Did Polaris stop selling that old style? I cant find it under their site anymore and when i look at the new one it under what units it fits it didnt appear to fit the same units as the legacy one.
Yes, Polaris doesn’t have the old style anymore.
It has been replaced with the new version, however (although hard to believe) some dealers may not have cycled through their old inventory.
The new style roof has all of the extrusions for the rear speakers, roof mounted pulse bar, dome light, and the detachable multi colored light.
 
  • Like
Reactions: Gerb4653

·
Administrator
Joined
·
6,980 Posts
Yup theres two potential lights that can be installed. The rectangular one that fits in the hole in the above picture and the rechargeable unit like you mention. They are both cool although stupid expensive. I like the rechargeable one for the ability to have different colors.
And to add to the expense, if you purchase the new style dome light, you need the roof mounted pulse bar or create your own wiring harness.
 
  • Like
Reactions: ridesdirt

·
Administrator
Joined
·
6,980 Posts
Ok, you have all of the updated components.
You are correct on the roof liner, speaker and pulse bar protrusions in the headliner.

Pull your headliner down a bit where the dome light goes.
At the front of the rectangle domelight extrusions, you should have an oval extrusion for the multifunction detachable light.
On the top side of the headliner should be an embossed area for cutting.
Same for the speakers.

I recommend removing the headliner when making the cut outs.
 
1 - 4 of 4 Posts
Top